Difference between revisions of "hidden:Replace a tape drive in HPSS"
From Lsdf
Line 23: | Line 23: | ||
ACSSA>logoff |
ACSSA>logoff |
||
− | '''8.3. reconfigure the drive in acsls''' |
+ | '''8.3. reconfigure the repalaced drive in acsls''' |
+ | |||
config drive x,y,z |
config drive x,y,z |
||
Drive id Old Type New Type chg Drive Serial Number |
Drive id Old Type New Type chg Drive Serial Number |
||
-------- -------- -------- ----------------------- |
-------- -------- -------- ----------------------- |
||
0 T1D unchanged * 579004007294 |
0 T1D unchanged * 579004007294 |
||
+ | |||
− | '''9. reconfigure the drive in hpss''' |
||
+ | '''8.4. reconfigure the drive in hpss''' |
||
− | '''change filed configure-->Device Name-->Update''' |
||
+ | |||
− | '''''' |
||
+ | change filed configure-->Device Name-->Update |
||
− | '''10. unlock the drive in hpss''' |
||
+ | |||
− | '''Devices and Drives-->select the drive''' |
||
− | ''' |
+ | '''8.5. unlock the drive in hpss''' |
+ | |||
− | '''Drive Administration-->Unlock''' |
||
+ | Devices and Drives-->select the drive |
||
− | '''''' |
||
+ | Device Administration-->Unlock |
||
− | '''''' |
||
+ | Drive Administration-->Unlock |
||
− | '''''' |
||
− | + | Read filed "Mover" "that is the mover the drive is connected to" |
|
− | + | log-in on the mover shown on previous step |
|
− | + | ls -l /dev/hpss |
|
Revision as of 19:00, 17 November 2017
Replace a tape drive in HPSS
1. log-in on core 2. call hpss gui: /opt/hpss/bin/hpssgui.pl & 3. Select Device/Drive List (if necessary choose preferency "Movers(tape)") 4. select the drive to be replaced 5. set "locked" the drive to be replaced: Device Administration-->Lock and Drive Administration-->Lock 6. drive is ready for replacing 7. replace the drive in the tape library 8. Reactivate the replaced drive in hpss 8.1 Show the drive configuration in hpss gui: Select the drive Choose Configure Read field "Drive Address" x,y,z,t 8.2. Reconfigure acsls log-in on acsls mashine cmd_proc -ql ACSSA> display drive * -f serial_num ACSSA>logoff 8.3. reconfigure the repalaced drive in acsls config drive x,y,z Drive id Old Type New Type chg Drive Serial Number -------- -------- -------- ----------------------- 0 T1D unchanged * 579004007294 8.4. reconfigure the drive in hpss change filed configure-->Device Name-->Update 8.5. unlock the drive in hpss Devices and Drives-->select the drive Device Administration-->Unlock Drive Administration-->Unlock Read filed "Mover" "that is the mover the drive is connected to" log-in on the mover shown on previous step ls -l /dev/hpss