Difference between revisions of "hidden:Replace a tape drive in HPSS"
From Lsdf
Line 5: | Line 5: | ||
'''2. call hpss gui: /opt/hpss/bin/hpssgui.pl &''' |
'''2. call hpss gui: /opt/hpss/bin/hpssgui.pl &''' |
||
'''3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")''' |
'''3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")''' |
||
− | '''4. select the drive to be |
+ | '''4. select the drive to be replaced''' |
− | '''5. set the drive to be |
+ | '''5. set "locked" the drive to be replaced: Device Administration-->Lock and Drive Administration-->Lock''' |
− | '''6. drive is ready for |
+ | '''6. drive is ready for replacing''' |
+ | '''7. replace the drive in the tape library''' |
||
− | '''''' |
||
− | ''' |
+ | '''8. Reactivate the replaced drive in hpss''' |
− | ''' |
+ | '''8.1 Show the drive configuration: ''' |
− | + | Select the drive |
|
− | + | Choose Configure |
|
− | + | Read field "Drive Address" x,y,z,t |
|
− | ''' |
+ | '''9. Reconfigure acsls ''' |
− | ''' |
+ | '''9.1.log-in on acsls mashine''' |
− | ''' |
+ | '''9.2 call cmd_proc ''' |
'''cmd_proc -ql''' |
'''cmd_proc -ql''' |
||
'''ACSSA> display drive * -f serial_num''' |
'''ACSSA> display drive * -f serial_num''' |
||
'''logoff''' |
'''logoff''' |
||
'''''' |
'''''' |
||
− | ''' |
+ | '''9.3. reconfigure the drive in acsls''' |
'''config drive x,y,z''' |
'''config drive x,y,z''' |
||
'''Drive id Old Type New Type chg Drive Serial Number''' |
'''Drive id Old Type New Type chg Drive Serial Number''' |
Revision as of 18:51, 17 November 2017
Replace a tape drive in HPSS
1. log-in on core 2. call hpss gui: /opt/hpss/bin/hpssgui.pl & 3. Select Device/Drive List (if necessary choose preferency "Movers(tape)") 4. select the drive to be replaced 5. set "locked" the drive to be replaced: Device Administration-->Lock and Drive Administration-->Lock 6. drive is ready for replacing 7. replace the drive in the tape library 8. Reactivate the replaced drive in hpss 8.1 Show the drive configuration: Select the drive Choose Configure Read field "Drive Address" x,y,z,t 9. Reconfigure acsls 9.1.log-in on acsls mashine 9.2 call cmd_proc cmd_proc -ql ACSSA> display drive * -f serial_num logoff ' 9.3. reconfigure the drive in acsls config drive x,y,z Drive id Old Type New Type chg Drive Serial Number -------- -------- -------- ----------------------- 0 T1D unchanged * 579004007294 9. reconfigure the drive in hpss change filed configure-->Device Name-->Update ' 10. unlock the drive in hpss Devices and Drives-->select the drive Device Administration-->Unlock Drive Administration-->Unlock ' ' ' Read filed "Mover" "that is the mover the drive is connected to" 7.2 log-in on the mover shown on step 7.1 7.2 ls -l /dev/hpss