hidden:Replace a tape drive in HPSS: Difference between revisions

From Lsdf
Jump to navigationJump to search
No edit summary
No edit summary
Line 5: Line 5:
'''2. call hpss gui: /opt/hpss/bin/hpssgui.pl &'''
'''2. call hpss gui: /opt/hpss/bin/hpssgui.pl &'''
'''3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")'''
'''3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")'''
'''4. select the drive to be changed'''
'''4. select the drive to be replaced'''
'''5. set the drive to be changed "locked" : Device Administration-->Lock and Drive Administration-->Lock'''
'''5. set "locked" the drive to be replaced: Device Administration-->Lock and Drive Administration-->Lock'''
'''6. drive is ready for changing'''
'''6. drive is ready for replacing'''
'''7. replace the drive in the tape library'''
''''''
'''7. Reactivate the replaced drive in hpss'''
'''8. Reactivate the replaced drive in hpss'''
'''7.1 Show the drive configuration: '''
'''8.1 Show the drive configuration: '''
'''Select the drive '''
Select the drive
'''Choose Configure'''
Choose Configure
'''Read field "Drive Address" x,y,z,t'''
Read field "Drive Address" x,y,z,t
'''8. Reconfigure acsls '''
'''9. Reconfigure acsls '''
'''8.1.log-in on acsls mashine'''
'''9.1.log-in on acsls mashine'''
'''8.2 call cmd_proc '''
'''9.2 call cmd_proc '''
'''cmd_proc -ql'''
'''cmd_proc -ql'''
'''ACSSA> display drive * -f serial_num'''
'''ACSSA> display drive * -f serial_num'''
'''logoff'''
'''logoff'''
''''''
''''''
'''8.3. reconfigure the drive in acsls'''
'''9.3. reconfigure the drive in acsls'''
'''config drive x,y,z'''
'''config drive x,y,z'''
'''Drive id Old Type New Type chg Drive Serial Number'''
'''Drive id Old Type New Type chg Drive Serial Number'''

Revision as of 18:51, 17 November 2017

Replace a tape drive in HPSS


1. log-in on core
2. call hpss gui: /opt/hpss/bin/hpssgui.pl &
3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")
4. select the drive to be replaced
5. set "locked" the drive to be replaced: Device Administration-->Lock and Drive Administration-->Lock
6. drive is ready for replacing
7. replace the drive in the tape library
8. Reactivate the replaced drive in hpss
8.1 Show the drive configuration: 
Select the drive
Choose Configure
Read field "Drive Address" x,y,z,t
9. Reconfigure acsls 
9.1.log-in on acsls mashine
9.2 call cmd_proc 
cmd_proc -ql
ACSSA> display drive * -f serial_num
logoff
'
9.3.  reconfigure the drive in acsls
config drive x,y,z
Drive id    Old Type         New Type         chg Drive Serial Number
  --------    --------         --------         -----------------------
  0           T1D              unchanged         *  579004007294
9. reconfigure the drive in hpss
change filed configure-->Device Name-->Update
'
10. unlock the drive in hpss
Devices and Drives-->select the drive
Device Administration-->Unlock
Drive Administration-->Unlock
'
'
'
Read filed  "Mover" "that is the mover the drive is connected to"
7.2 log-in on the mover shown on step 7.1
7.2 ls -l /dev/hpss



back to HPPS main page