hidden:Replace a tape drive in HPSS: Difference between revisions

From Lsdf
Jump to navigationJump to search
(Created page with "'''Replace a tape drive in HPSS''' ----<small>back to HPPS main page</small>")
 
No edit summary
Line 1: Line 1:
'''Replace a tape drive in HPSS'''
'''Replace a tape drive in HPSS'''


'''1. log-in on core'''
'''2. call hpss gui: /opt/hpss/bin/hpssgui.pl &'''
'''3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")'''
'''4. select the drive to be changed'''
'''5. set the drive to be changed "locked" : Device Administration-->Lock and Drive Administration-->Lock'''
'''6. drive is ready for changing'''
''''''
'''7. Reactivate the replaced drive in hpss'''
'''7.1 Show the drive configuration: '''
'''Select the drive '''
'''Choose Configure'''
'''Read field "Drive Address" x,y,z,t'''
'''8. Reconfigure acsls '''
'''8.1.log-in on acsls mashine'''
'''8.2 call cmd_proc '''
'''cmd_proc -ql'''
'''ACSSA> display drive * -f serial_num'''
'''logoff'''
''''''
'''8.3. reconfigure the drive in acsls'''
'''config drive x,y,z'''
'''Drive id Old Type New Type chg Drive Serial Number'''
''' -------- -------- -------- -----------------------'''
''' 0 T1D unchanged * 579004007294'''
'''9. reconfigure the drive in hpss'''
'''change filed configure-->Device Name-->Update'''
''''''
'''10. unlock the drive in hpss'''
'''Devices and Drives-->select the drive'''
'''Device Administration-->Unlock'''
'''Drive Administration-->Unlock'''
''''''
''''''
''''''
'''Read filed "Mover" "that is the mover the drive is connected to"'''
'''7.2 log-in on the mover shown on step 7.1'''
'''7.2 ls -l /dev/hpss'''





Revision as of 18:49, 17 November 2017

Replace a tape drive in HPSS


1. log-in on core
2. call hpss gui: /opt/hpss/bin/hpssgui.pl &
3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")
4. select the drive to be changed
5. set the drive to be changed  "locked" : Device Administration-->Lock and Drive Administration-->Lock
6. drive is ready for changing
'
7. Reactivate the replaced drive in hpss
7.1 Show the drive configuration: 
Select the drive 
Choose Configure
Read field "Drive Address" x,y,z,t
8. Reconfigure acsls 
8.1.log-in on acsls mashine
8.2 call cmd_proc 
cmd_proc -ql
ACSSA> display drive * -f serial_num
logoff
'
8.3.  reconfigure the drive in acsls
config drive x,y,z
Drive id    Old Type         New Type         chg Drive Serial Number
  --------    --------         --------         -----------------------
  0           T1D              unchanged         *  579004007294
9. reconfigure the drive in hpss
change filed configure-->Device Name-->Update
'
10. unlock the drive in hpss
Devices and Drives-->select the drive
Device Administration-->Unlock
Drive Administration-->Unlock
'
'
'
Read filed  "Mover" "that is the mover the drive is connected to"
7.2 log-in on the mover shown on step 7.1
7.2 ls -l /dev/hpss



back to HPPS main page