hidden:Adding and deleting a tape drive
From Lsdf
Jump to navigationJump to search
1. zone drive in SAN accordingly(contact SAN admins)
2. scan all tape drives on the mover
Example:
[root@hpssmvr01 ~]# sg_map -st -x -i| grep nst
/dev/sg145 4 0 0 0 1 /dev/nst0 IBM 03592E07 398B
/dev/sg146 3 0 0 0 1 /dev/nst1 IBM 03592E07 398B
/dev/sg148 5 0 0 0 1 /dev/nst2 STK T10000D 4.08
3.there should be a link for every drive in /dev/hpss
Example:
[root@hpssmvr01 ~]# ls -l /dev/hpss
total 0
lrwxrwxrwx 1 root root 8 Jul 28 14:57 pci-0000:1b:00.0-fc-0x5005076300520441-lun-1-1IBM_03584L22_0000078143560401 -> ../sg147
lrwxrwxrwx 1 root root 7 Jul 28 14:57 st.1b.0-03592E07-0000078DB21A -> ../nst1
lrwxrwxrwx 1 root root 7 Jul 28 14:57 st.1b.1-03592E07-0000078DB1E5 -> ../nst0
lrwxrwxrwx 1 root root 7 Jul 28 14:57 st.86.0-T10000D-579004003070 -> ../nst2
4.GUI--->Configure-->Devices & Drives -->Create Tape
Fill in:
Drive ID
Device Type
Mover
Device Name : /dev/hpss/st.86.0-T10000D-579004003070
Device Address:
STK Library:
Taken from acsls machine
ACSSA> display drive * -serial 579004003070
2016-11-16 15:55:06 Display Drive
Acs Lsm Panel Drive Type Status State Volume
3 2 1 0 T1D available online
Device Address is: 3,2,1,0
IBM Library:
Example:
[root@hpssmvr02 ~]# /opt/hpss/bin/device_scan -t tape -s /dev/sg146
Device=[/dev/sg146]
Vendor = [IBM]
Product = [03592E07]
Revision = [398B]
Vendor info = [398BWT0000078DB210 0]
Vital Product =
Identifier = ['T10:IBM|03592E07 0000078DB210']
Device Address is: T10:IBM|03592E07 0000078DB210
Controler ID = Device ID Polling Interval: -1 5. GUI-->Configure-->Devices & Drives-->Drive Info-->Unlocked
