Difference between revisions of "FAQ, Questions and answers"
From Lsdf
m (Created page with "* Missing drive on a mover. Possible solutions: ** From Scott: I noticed that the /dev/hpss/ symlink that is created by the udev rules did not exist on mover1. There are 3 tap…") |
m |
||
| Line 1: | Line 1: | ||
* Missing drive on a mover. Possible solutions: |
* Missing drive on a mover. Possible solutions: |
||
| + | ** From Scott: I noticed that the /dev/hpss/ symlink that is created by the udev rules did not exist on mover1. There are 3 tape drives that are zoned for this mover, the first 2 Jae disabled, and the third Ahmad and I encountered today. lsscsi showed that 3 tape drives were seen by the machine, so I executed a udevadm trigger, and the sym links that were expected were created, and matched the paths configured in HPSS. At this point all servers are Green and you are good to proceed with testing as Ahmad mentioned in the other email chain. |
||
| − | ** From Scott: I noticed that the /dev/hpss/ symlink |
||
| − | that is created by the udev rules did not exist on mover1. There are 3 tape |
||
| − | drives that are zoned for this mover, the first 2 Jae disabled, and the third |
||
| − | Ahmad and I encountered today. lsscsi showed that 3 tape drives were seen by the |
||
| − | machine, so I executed a udevadm trigger, and the sym links that were expected |
||
| − | were created, and matched the paths configured in HPSS. At this point all |
||
| − | servers are Green and you are good to proceed with testing as Ahmad mentioned in |
||
| − | the other email chain. |
||
Latest revision as of 21:38, 16 October 2014
- Missing drive on a mover. Possible solutions:
- From Scott: I noticed that the /dev/hpss/ symlink that is created by the udev rules did not exist on mover1. There are 3 tape drives that are zoned for this mover, the first 2 Jae disabled, and the third Ahmad and I encountered today. lsscsi showed that 3 tape drives were seen by the machine, so I executed a udevadm trigger, and the sym links that were expected were created, and matched the paths configured in HPSS. At this point all servers are Green and you are good to proceed with testing as Ahmad mentioned in the other email chain.
