hidden:Replace a tape drive in HPSS
From Lsdf
Jump to navigationJump to search
Replace a tape drive in HPSS
1. log-in on core 2. call hpss gui: /opt/hpss/bin/hpssgui.pl & 3. Select Device/Drive List (if necessary choose preferency "Movers(tape)") 4. select the drive to be changed 5. set the drive to be changed "locked" : Device Administration-->Lock and Drive Administration-->Lock 6. drive is ready for changing ' 7. Reactivate the replaced drive in hpss 7.1 Show the drive configuration: Select the drive Choose Configure Read field "Drive Address" x,y,z,t 8. Reconfigure acsls 8.1.log-in on acsls mashine 8.2 call cmd_proc cmd_proc -ql ACSSA> display drive * -f serial_num logoff ' 8.3. reconfigure the drive in acsls config drive x,y,z Drive id Old Type New Type chg Drive Serial Number -------- -------- -------- ----------------------- 0 T1D unchanged * 579004007294 9. reconfigure the drive in hpss change filed configure-->Device Name-->Update ' 10. unlock the drive in hpss Devices and Drives-->select the drive Device Administration-->Unlock Drive Administration-->Unlock ' ' ' Read filed "Mover" "that is the mover the drive is connected to" 7.2 log-in on the mover shown on step 7.1 7.2 ls -l /dev/hpss
