TCP/IP Network: Difference between revisions

From Lsdf
Jump to navigationJump to search
mNo edit summary
mNo edit summary
Line 29: Line 29:
|141.52.216.0/22||routed via KIT FW (usage ??)
|141.52.216.0/22||routed via KIT FW (usage ??)
|-
|-
|141.52.220.0/25||HPSS Control and Admin
|141.52.220.x/25||HPSS Control and Admin
|-
|-
|141.52.221.0/24||reserved
|141.52.221.0/24||reserved
|-
|-
|141.52.222.0/25||HPSS Data
|141.52.222.x/25||HPSS Data
|}
|}

Revision as of 10:03, 13 February 2014

The LSDF uses a 10 Gigabit Ethernet (10GE) throughout its infrastructure maintained by the networking department of SCC. The SCC NET department combines highest standards in operational stability with continuous improvements of the network software and infrastructure fixtures.

Striving to have as much services as possible the network has been designed to be as redundant as possible by double connections and highly available routers using double supervisor boards. However redundancy is sometimes limited by hard and or software capabilities. Some connections are shared with the KIT backbone as long as the network traffic does not affect each other significantly.

Networking engineers Ms. Aurelie Reymund and head of the SCC/NET Mr. Reinhard Strebler have designed a state of the art low latency, campus wide, top speed data shipping highway to serve data intensive science at KIT. A detailed drawing, courtesy SCC/NET, is [here].

The following networks are defined:

subnet/mask status
141.52.208.0/24 lsdf dis (gpfs)
141.52.209.0/24 unused
141.52.210.0/24 lsdf lsdf dis (sonas)
141.52.211.0/24 unused
141.52.212.0/24 VM range (open nebula)
141.52.213.0/24 unused
141.52.214.0/24 unused
141.52.215.x/26 small nets for LSDF attached institutes
141.52.216.0/22 routed via KIT FW (usage ??)
141.52.220.x/25 HPSS Control and Admin
141.52.221.0/24 reserved
141.52.222.x/25 HPSS Data