hidden:Replace a tape drive in HPSS: Difference between revisions
From Lsdf
Jump to navigationJump to search
(Created page with "'''Replace a tape drive in HPSS''' ----<small>back to HPPS main page</small>") |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Replace a tape drive in HPSS''' |
'''Replace a tape drive in HPSS''' |
||
'''1. log-in on core''' |
|||
'''2. call hpss gui: /opt/hpss/bin/hpssgui.pl &''' |
|||
'''3. Select Device/Drive List (if necessary choose preferency "Movers(tape)")''' |
|||
'''4. select the drive to be changed''' |
|||
'''5. set the drive to be changed "locked" : Device Administration-->Lock and Drive Administration-->Lock''' |
|||
'''6. drive is ready for changing''' |
|||
'''''' |
|||
'''7. Reactivate the replaced drive in hpss''' |
|||
'''7.1 Show the drive configuration: ''' |
|||
'''Select the drive ''' |
|||
'''Choose Configure''' |
|||
'''Read field "Drive Address" x,y,z,t''' |
|||
'''8. Reconfigure acsls ''' |
|||
'''8.1.log-in on acsls mashine''' |
|||
'''8.2 call cmd_proc ''' |
|||
'''cmd_proc -ql''' |
|||
'''ACSSA> display drive * -f serial_num''' |
|||
'''logoff''' |
|||
'''''' |
|||
'''8.3. reconfigure the drive in acsls''' |
|||
'''config drive x,y,z''' |
|||
'''Drive id Old Type New Type chg Drive Serial Number''' |
|||
''' -------- -------- -------- -----------------------''' |
|||
''' 0 T1D unchanged * 579004007294''' |
|||
'''9. reconfigure the drive in hpss''' |
|||
'''change filed configure-->Device Name-->Update''' |
|||
'''''' |
|||
'''10. unlock the drive in hpss''' |
|||
'''Devices and Drives-->select the drive''' |
|||
'''Device Administration-->Unlock''' |
|||
'''Drive Administration-->Unlock''' |
|||
'''''' |
|||
'''''' |
|||
'''''' |
|||
'''Read filed "Mover" "that is the mover the drive is connected to"''' |
|||
'''7.2 log-in on the mover shown on step 7.1''' |
|||
'''7.2 ls -l /dev/hpss''' |
|||
Revision as of 18:49, 17 November 2017
Replace a tape drive in HPSS
1. log-in on core 2. call hpss gui: /opt/hpss/bin/hpssgui.pl & 3. Select Device/Drive List (if necessary choose preferency "Movers(tape)") 4. select the drive to be changed 5. set the drive to be changed "locked" : Device Administration-->Lock and Drive Administration-->Lock 6. drive is ready for changing ' 7. Reactivate the replaced drive in hpss 7.1 Show the drive configuration: Select the drive Choose Configure Read field "Drive Address" x,y,z,t 8. Reconfigure acsls 8.1.log-in on acsls mashine 8.2 call cmd_proc cmd_proc -ql ACSSA> display drive * -f serial_num logoff ' 8.3. reconfigure the drive in acsls config drive x,y,z Drive id Old Type New Type chg Drive Serial Number -------- -------- -------- ----------------------- 0 T1D unchanged * 579004007294 9. reconfigure the drive in hpss change filed configure-->Device Name-->Update ' 10. unlock the drive in hpss Devices and Drives-->select the drive Device Administration-->Unlock Drive Administration-->Unlock ' ' ' Read filed "Mover" "that is the mover the drive is connected to" 7.2 log-in on the mover shown on step 7.1 7.2 ls -l /dev/hpss
