Difference between revisions of "Configuration of the UI"

From Gridkaschool
(Created page with "The user interface requires similar to the other gLite services variables to be defined and set in the site-info.def file. Create an empty file site-info.def in the directory /r…")
 
(No difference)

Latest revision as of 18:28, 28 December 2012

The user interface requires similar to the other gLite services variables to be defined and set in the site-info.def file.

Create an empty file site-info.def in the directory /root/yaim/ 

mkdir /root/yaim
cd /root/yaim
touch site-info.def
chown -R 600 /root/yaim

and add the following variables 

BDII_HOST=bdii-fzk.gridka.de      # Fully qualified hostname of the BDII
PX_HOST=px-fzk.gridka.de          # Fully qualified hostname of MyProxy Server
RB_HOST=wms-a-kit.gridka.de       # Fully qualified hostname of a Resource Broker
SITE_NAME=GKSXYZ 
VOS=dech                          # List of supported VOs
VO_<vo-name>_VOMSES=<Parameters needed to contact a VOMS server>
VO_<vo-name>_VOMS_CA_DN=<Distinguished Name of the CA that signs the VOMS server certificate>

Replace the virtual organization specific values for dech (see VO configuration) and fill in also the values for the RB (e.g. wms-[abcd]-kit.gridka.de), BDII (e.g. bdii-fzk.gridka.de) and PX hosts (e.g. px-fzk.gridka.de) responsible for your site.

After you saved your changes to the site-info.def and checked for

  • the existence of the gcc compiler and
  • put the host certificate and key in place in the directory /etc/grid-security/

the configuration via yaim can be started 

/opt/glite/yaim/bin/yaim -c -s /root/yaim/site-info.def -n glite-UI

If the gcc is not installed on your system please run 

yum install gcc

before running yaim. The output of yaim is listed below. You should see a similiar output on your screen 

  INFO: Using site configuration file: /root/yaim/site-info.def
  INFO: 
        ###################################################################
        
        .             /'.-. ')
        .     yA,-"-,( ,m,:/ )   .oo.     oo    o      ooo  o.     .oo
        .    /      .-Y a  a Y-.     8. .8'    8'8.     8    8b   d'8
        .   /           ~ ~ /         8'    .8oo88.     8    8  8'  8
        . (_/         '===='          8    .8'     8.   8    8  Y   8
        .   Y,--,Yy,-.,/           o8o  o8o    o88o  o8o  o8o    o8o
        .    I_))_) I_))_)
        
        
        current working directory: /root
        site-info.def date: Aug 19 10:45 /root/yaim/site-info.def
        yaim command: -c -s /root/yaim/site-info.def -n glite-UI
        log file: /opt/glite/yaim/bin/../log/yaimlog
        Thu Aug 19 10:55:01 CEST 2010 : /opt/glite/yaim/bin/yaim
        
        Installed YAIM versions:
        glite-yaim-clients 4.0.9-2
        glite-yaim-core 4.0.12-1
        
        ####################################################################
  INFO: The default location of the grid-env.(c)sh files will be: /opt/glite/etc/profile.d
  INFO: Sourcing the utilities in /opt/glite/yaim/functions/utils
  INFO: Detecting environment
  INFO: Executing function: config_sysconfig_lcg_check 
  INFO: Executing function: config_globus_clients_check 
  INFO: Executing function: config_lcgenv_check 
  INFO: Executing function: config_rgma_client_check 
  INFO: Executing function: config_workload_manager_client_check 
  INFO: Executing function: config_amga_client_check 
  INFO: Executing function: config_gsissh_check 
  INFO: Executing function: config_glite_ui_check 
  INFO: Executing function: config_vomses_check 
  INFO: Executing function: config_globus_devel_check 
  INFO: Executing function: config_vomsdir_check 
  INFO: Executing function: config_add_pool_env_check 
  INFO: Executing function: config_ldconf 
  INFO: Executing function: config_sysconfig_edg 
  INFO: Executing function: config_sysconfig_globus 
  INFO: Executing function: config_sysconfig_lcg 
  INFO: Executing function: config_crl 
  INFO: Executing function: config_globus_clients_setenv 
  INFO: Executing function: config_globus_clients 
  INFO: Configure the globus service
setup-tmpdirs: creating ./config.status
config.status: creating globus-script-initializer
config.status: creating Paths.pm
creating globus-sh-tools-vars.sh
creating globus-script-initializer
creating Globus::Core::Paths
checking globus-hostname
Done
  INFO: Executing function: config_lcgenv 
  INFO: Executing function: config_rgma_client_setenv 
  INFO: Executing function: config_rgma_client 
  INFO: YAIM has detected the OS is SL5. The rgma client is no longer configured in SL5.
  INFO: Executing function: config_workload_manager_client_setenv 
  INFO: Executing function: config_workload_manager_client 
  INFO: Executing function: config_fts_client 
  INFO: Executing function: config_amga_client_setenv 
  INFO: Executing function: config_amga_client 
  INFO: Executing function: config_gsissh_setenv 
  INFO: Executing function: config_gsissh 
Configuring gsi_openssh
------------------------------------------------------------
Executing... 

Notes:

  o Privilege separation is off.
  o GSI-OpenSSH website is <http://grid.ncsa.uiuc.edu/ssh/>.
------------------------------------------------------------
Finished configuring gsi_openssh.
  INFO: Executing function: config_glite_ui_setenv 
  INFO: Executing function: config_glite_ui 
  WARNING: The file /tmp/jobOutput specified in the variable OUTPUT_STORAGE doesn't exist
  WARNING: The user is responsible for creating this file !
  INFO: Executing function: config_vomses 
  INFO: Executing function: config_globus_devel_setenv 
  INFO: Executing function: config_globus_devel 
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD/globus_core-4.30/
gpt-build ====> BUILDING FLAVOR gcc32
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD
gpt-build ====> REMOVING empty package globus_core-gcc32-pgm_static
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD/globus_core-4.30/
gpt-build ====> BUILDING FLAVOR gcc32pthr
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD
gpt-build ====> REMOVING empty package globus_core-gcc32pthr-pgm_static
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD/globus_core-4.30/
gpt-build ====> BUILDING FLAVOR gcc32dbg
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD
gpt-build ====> REMOVING empty package globus_core-gcc32dbg-pgm_static
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD/globus_core-4.30/
 gpt-build ====> BUILDING FLAVOR gcc32dbgpthr
gpt-build ====> Changing to /opt/globus/setup/globus/BUILD
gpt-build ====> REMOVING empty package globus_core-gcc32dbgpthr-pgm_static
gpt-build ====> REMOVING empty package globus_core-noflavor-doc
  INFO: Executing function: config_vomsdir_setenv 
  INFO: Executing function: config_vomsdir 
  INFO: Executing function: config_add_pool_env_setenv 
  INFO: Executing function: config_add_pool_env 
  INFO: Configuration Complete.                                               [  OK  ]
  INFO: YAIM terminated succesfully.

NOTE: The function lists for the yaim configuration are located in /opt/glite/yaim/node-info.d/. You can have a look at the lists on the machines or in the wiki under category "Function lists".

Functions used for the configuration of the user interface can be found here.

Please have a look at the output of yaim for possible errors and warnings. For example 

  WARNING: The file /tmp/jobOutput specified in the variable OUTPUT_STORAGE doesn't exist
  WARNING: The user is responsible for creating this file !

or 

  WARNING: /opt/glite/libexec/fetch-crl.sh didn't finish succesfully
  WARNING: CRLs may not be updated, please have a look

To fix the first warning create the /tmp/jobOutput directory. This directory will be used to store the job output. The second error may be caused by not installing the lcg-CA packages.

Next step is Testing the user interface

Go back to gLite Administration Course, User Interface, Installing a user interface

Retrieved from "https://wiki.scc.kit.edu/gridkaschool/index.php?title=Configuration_of_the_UI&oldid=869"